Having bought a house recently, cash flow has been at something of a premium. So, whenever I can find a way to bing a fun improvement to my desk for no out of pocket costs, I’m very focused. Today I had the idea that I could re-purpose the stand from my 27″ iMac, which looks like this:
to be an over desk shelf for my most excellent ScanSnap S1500M. Here is the inverted stand on the edge of my “progeny of the Perfect GTD desk” which I will someday, post about.
As every angle of the iMac stand is “out of plane” to attach the stand to my desk required an evolutionary step beyond my normal double sided sticky tape technology platform. So instead of tape, I used drywall screws. If you look in the following picture you will see 5 1″ black drywall screws loosely holding the stand to the under side of the desk, and around the corner from them, you will see two 2″ drywall screws holding the platform (was base, is now the shelf) parallel to the desk.
Note, I am laying on the floor looking up at the underside of my desk in this shot.
Here is another angle looking across the desk:
And here is another angle looking across the face of the desk at the shelf and the monitor:
Apologies for the 24″ iMac growing out of the back of the shelf in this picture. *Note* if you have a spare 2.8 GHZ iMac motherboard from the early 2008 24″ iMac, email me at firstname.lastname@example.org otherwise I’m going to have to scrap this machine. :-(
Moment of silence
Now, back to bricolage. Here is a shot of the ScanSnap on the shelf closed up in hibernation mode.
And here is the scanner open and ready for action!
More with less!
I may have to employ double sided sticky tape to make sure the scanner does not walk off the shelf. But I’m going to wait and see if the built in non-skid strip is enough. I don’t like the idea of sticking my scanner down because the best way to get people to understand how great a scanner is, is to take my scanner and let friends scan their documents. Something about scanning your own documents activates a neural pathway that description misses. So, I’d like to preserve my free range ScanSnap if I can.