“Just a small fire on the motherboard”

Introduction:

Well, it has been my computer boot camp week for the year.  Every year, another boot camp.  This year it started last Tuesday June 11th when I noticed that my 27″ iMac was off and could not be turned on.  Great! 

So, I made an appointment to go to the Apple store at the end of I205 around Portland and met up with TJ the Genius.  When I talked to TJ, I had a good idea of that either the power supply or the motherboard or both, were fried.  So, I left the Mac with him over night and pre-approved him fixing both power supply ($67) and the motherboard ($540 which was about what used motherboards are on ebay for this machine).  Net result was that “a small fire on the motherboard” had fried both the power supply and the motherboard.  :-( 

But …

Before I could get my iMac to the Genius bar, I had to reverse the installation of the VESA adapter.  Which took a good 90 minutes in order to go slow and avoid any SPAZ (I am a hopelessly absent minded SPAZ) PHD (and yes, I’m a PhD so I’m licensed to be this absent minded) damage to the computer.  Slow and steady. 

I hate VESA adapters!

But, when I brought my repaired iMac home, I decided not to re-install the VESA adapter because I wanted to try a new way to mount my 27″ iMac since the newest generation of iMacs can only have their VESA adapters installed if you have a custom built unit.  That, and at 53 I’m tired of messing with anything but the most essential productivity areas of computers.  So, here is the picture of a direct mounted 75 MM bracket to my iMac’s stand:

Now, here is a closer shot: 

Ok, yeah, this is unorthodox.  But I was able to make it work because of the flexibility in the “neck” of the monitor stand, and the amazing flexibility of my Innovative Designs Giant Mamun (Henderson the rain king allusion) Monitor Arm.  So here is what the “dark side” of my GTD desk force looks like: 

See how the monitor stand is tipped at almost a 45 degree angle so the base is out of the way?  This is the secret to being able to mount your monitor arm directly to your iMac’s stand. *Note* that I’ve elected to use drywall screws to force the monitor to stay tilted out at the bottom (no *flames* please).  

The holes in the monitor arm that the drywall screws are penetrating are there due to my efforts to repurpose the iMac stand in order to hold my most excellent Fujitsu Scanner above my desk.  Here’s a refresher link and picture: 

With a closeup to the vertical holes on the upside down iMac stand:

So, what does the iMac look like to work with?  Great question! Here it is: 

Anyone with a new iMac 27″ that wants to use the Innovative 7500-HD stand, drop me an email (bill@basicip.com) and I’ll be happy to converse with you and share.  

Bill Meade 

 

 

 

Abomination of Deskolation … Redeemed!

First the before pictures:

Ladies and gentlemen, 28 years in the making, RestartGTD brings you THE ABOMINATION OF DESKOLATION!

Figure 1: The Abomination of Deskolation!

Figure 2: The Accompanying Office

Now the after pictures:

Figure 3: The wait, … what?

Figure 4: Wow, just wow!

Figure 5: How It was accomplished

The Story:

This is John Niebergall’s desk.  John is an engineering teacher at Sherwood High School in South Portland.  As I’ve gotten to know John (i.e., seen his desk and had him over to my office to see my desk), I encouraged him to read GETTING THINGS DONE.  Over the holidays John listened to GTD three or four times via Audible, and then wanted help translating the ideas in GTD to his work processes.  I believe the specific words were “I’m a visual learner, I don’t do well reading books.  I need to see it.”

John is the target blog reader that I started RestartGTD to serve.  I’ve traveled to John’s office, carrying my Fujitsu ScanSnap S1500M (I use portable Macs), had John take down one of the three ring binders against the back wall of his office, and we scanned it into PDF.   Done!  Four minutes, and now the paper and the binder both can go in the recycle bin.   It was hard to let that first binder go.  But the liberation grows on you rapidly.  It gets easier the more space you free up in your office.

Seeing scanning is believing.  John ordered his own Fujitsu ScanSnap S1500 (PC) and I made another trip down to his office to take the scanner out of the box.  Maybe I should do a poll of how many GTDers have purchased scanners and never taken them out of the box? You know who you are! De-boxing is the key next action in getting a scanner up and contributing to your mind-like-water.

In addition to the visible things on and around John’s desk, I believe there is a second USB hub that is hidden inside the typing elevator drawer space.  And also, that there is a power adapter in that space to feed the label printer and scanner.

Reflections on Abomination’s Redemption:

Note in Figure 1, that John had a trackball on his desk when he started GTD.  This desk makeover has shifted him to a small travel mouse. There are wireless trackballs from Logitech and Kensington, but they cost $30 more than the Logitech M305.

John chose to keep his legacy desk with leg stalls.  That is this style of desk is like a horse stall, only for your legs.  I prefer sliding side to side so that I can start parallel projects on different parts of my desk during the day as interruptions happen.  My advice to John was to cut the surface off this desk and then mount it on IKEA legs. Ikea’s desks have inexpensive cable management options, and they are simple to work with.

The glass on the desk feels disruptive to me.  Glass is cold when you put your hands and forearms on it.  I think I’d prefer to remove the glass, and then I’d probably resurface this desk with white-board-contact-paper.  White lightens the room (always welcome in Portland where we get 5.5 inches of rain per month), and gives you a place to jot notes with white board pens, so you can save paper.

John is a public school teacher who has been in Sherwood High School for 28 years.  And he is digging his way out via GTD.  Teachers, you CAN DO THIS!   If I can shift to GTD, anyone can.  The key is to start.  Don’t start big or small.  Don’t give yourself the chance to over think this.  Just start.  John got the scanner, Evernote, and then beautifully reconfigured his desk (putting the scanner on the old typewriter elevator is genius!:-) to support his workflow.

Thank you John for sharing your before after.  Anyone else interested in sharing?  Before/afters are fantastic motivators.  Email me if you have pics you are willing to share.

bill@basicip.com

 

 

GTD: Before and After

GETTING THINGS DONE (hereafter GTD) has had a big impact on me.  As witness, this post shows as much of the before/after GTD as I can articulate, it will evolve as I refine the post into enough detail to please visual learners (you know who you are John Nieberall!).

Question 1: What is GTD?

To my mind, GTD is a brain hack. GTD may look like a self help book, it may feel like a religious cult.  But, GTD is an approach to organizing that helps you shop around for tools that allow productivity with a peacefulness.

GTD is important because life does not come with an owner’s manual that says “get organized in a sustainable high performance way.”  So people go through school, work, phd programs (I did all three) and never spend a day getting organized beyond coping with the next deadline.

Here is the GTD architecture diagram taken from the PDF accompanying the Audible version of GTD:

Question 2: What did your life/office look like before GTD (circa 2009)?

In the garage, I also had a 5 drawer horizontal filing cabinet with 94,000 pages of journal articles, research data, and miscellaneous documents that were too good to throw out but not good enough to use.  Here is the filing cabinet in the garage next to the Y2K water barrel.

Question 3: What does your life/desk look like after GTD?

Note that this desk is: (1) large 6′ x 35″, (2) clutter free from the surface up 6″, (3) canted (the front edge is 1″ closer to the floor than the back edge.  I will write more posts on desks and their requirements as taking back my desk was a key stepping stone for implementing GTD.

<<Aside>> the most up to date “after” desk picture is available in the Dungeon Desk post.

Next comes my physical filing system (Target totes) with 5″ book ends in the tote if there are not enough manilla folders to completely fill the tote:

But, over the years, I’m using fewer and fewer of these totes, and shifting the vast majority of my projects into electronic formats. The reason for this is Evernote. Go buy Evernote. Do it. Do it now!

Nothing has helped me to stay on the GTD wagon more than Evernote. Makes it easier to file documents correctly, than to deal with the clutter, loss, and despair of messy papers.

So while before GTD had the 5 drawer horizontal file cabinet, after GTD I have a modified GTD system:

To get from paper to Evernote I raked through the 94,000 pages of paper in the file cabinet, and ask myself for each document “Will there ever be a next action for this document?” 80% of the documents were instant “No!” and they went straight into recycling.  The 20% that were yes or maybe, were 17,500 pages which I scanned in a week on my Fujitsu ScanSnap.

Here is my annual capture of reference file information.  The median monthly count of documents captured for the first three years of my using Evernote, is 65.  For the most recent 3 years, the median is 164 documents per month.

Many of the documents I capture in evernote are web pages, the Evernote Webclipper and Evernote Clearly browser add ins have become indispensable for me. I’ve capture 3,336 documents via Web Clipper (to see how many you’ve captured type source:web.clip* in Evernote’s search box). The total for Clearly is 1,441 documents captured (source:clearly*). I use Web Clipper whenever I need to assign the notebook the document needs to be placed in.

Here is my cumulative Evernote document count over the 57 months I’ve been doing GTD.  The jumps happen as I have scanned and recycled, as I Evernote has lifted limits on file sizes, as I’ve moved, and often, when I start a new job. I have 48 gigabytes of information in Evernote as of 2014/10/01. But I’ve paid just $45 a year, which has felt like rounding error. Nothing.

My final offering to the visual learner on Before/After GTD is a worksheet that covers more pieces of my system (GTDInfrastructureEvolution01b.xlsx):

Here is a summary view of how I am doing GTD after 3 years:

See also 5 years of subsequent GTD system evolution in GTD Time Lapse.

bill